Product Overview
This flat vertical surface mounted, swing-away stool features
adjustable seat heights and is equipped with a nonskid
glide for added
steadiness. Available with many optional seat and
backrest configurations. 1Y wall mounted seating is perfect
for the industrial
environment, school
labs, or any place seating
is needed that can swing out of the way.
1Y Seat Height Adjustment Range -
22 3/4" - 28"
1Y Standard
Features
Seat: 13" diameter, made of 18-gauge
steel with formed flange and no sharp edges, 22 3/4" from
floor to top of seat in low position, 20 3/4" from
wall to outside edge of seat
Frame: two-bar unit, 1 1/8" diameter,
made of 16-gauge steel tubing
Attaching Bracket: 2" wide, made of
7-gauge steel, spring loaded to allow stool base to contact
floor only when weight is applied to the unit
Controls: Soft Touch pneumatic seat-height adjustment (range of 5 1/4")
Metal parts: black powder-coated finish; available in other
colors
Glide: nonskid
Seating: Seating options change the low seat height and wall-to-outside
edge
of seat dimensions. See chart below.
|
|
Seat
height Adjustment Range |
Wall to Outside
Edge |
|
|
1Y50-Standard -
Steel seat |
22
3/4" - 28" |
20
3/4" |
Optional Seats -
Below are additional seat and backrest
options offered on 1Y
seating. Additional charges apply. |
|
|
1Y50-BE – Backrest
is 15 1/2" wide x 14 1/2" high, lumbar support,
plastic protective panel; seat is concave, 18 1/2" wide
x 16 1/2" deep x 3" thick with internal seat
board bumperguard. |
26 1/4"-
31 1/2" |
22" |
 |
1Y50-BT – Backrest
is 14 1/2" wide x 9 1/2" high, lumbar support,
plastic protective panel; seat is concave, 18 1/2" wide
x 16 1/2" deep x 3 " thick with internal
seat board bumperguard. |
26
1/4"-
31 1/2" |
22" |
|
1Y50-CX – Seat
is round, 14" diameter x 1 1/2" thick, self-skinned
urethane. |
25
1/4"-
30 1/2" |
21
1/4" |
|
1Y50-DD – Backrest
is Duragrain woodgrain molded styrene, 13 3/4" wide
x 6" high; seat is Duragrain woodgrain molded
styrene, 15 1/4" wide x 14 1/2" deep x 1/2" thick. |
25"-
30
1/4" |
21
7/8" |
|
1Y50-EE – Backrest
is 15 1/2" wide x 14 1/2" high, lumbar support,
plastic protective panel; seat is ergonomic, 18 1/2" wide
x 17" deep x 3" thick with waterfall front,
four-way contouring and internal seat board bumperguard. |
27"-
32
1/4" |
23
3/4" |
 |
1Y50-ET – Backrest
is 14 1/2" wide x 9 1/2" high, lumbar support,
plastic protective panel; seat is ergonomic, 18 1/2" wide
x 17" deep x 3" thick with waterfall front,
four-way contouring and internal seat board bumperguard. |
27"-
32
1/4" |
23
3/4" |
|
1Y50-PX – Seat/backrest
is one-piece, high-density polypropylene plastic shell,
15 1/4" wide x 15" deep x 15" high. |
25
3/4"-
31" |
21
7/8" |
 |
1Y50-RT – Backrest
is 14 1/2" wide by 9 1/2" high with lumbar
support and plastic protective panel; seat is round,
15" diameter, upholstered with 2 1/2" of
high-resilience molded foam cushioning. |
26
1/2"-
31 3/4" |
21
3/4 |
|
1Y50-RX – Seat
is round, 15" diameter, upholstered with 2 1/2"of
high-resilience molded foam cushioning and internal
seat board bumperguard. |
26
1/2"-
31 3/4" |
21
3/4" |
|
1Y50-UU – Backrest
is self-skinned urethane with integral lumbar support,
16 1/2" wide x 12 1/2" high with 3/32" ventilating
ribs; seat is self-skinned urethane, 18 1/2" wide
x 17" deep x 1 1/2" thick with waterfall
front, shaped rear edge and 3/32" ventilating
ribs. |
25
1/4"-
30 1/2" |
23
1/2" |
|
1Y50-WS – Round,
maple wood seat, 13" diameter and 1" thick |
23
3/4"-
29" |
20
3/4" |
|
1Y50-WW –
Backrest is 14 1/2" wide x 8 3/4" high x 1/4" thick
5-ply maple plywood; seat is 16 1/2" wide x 15 1/4" deep
x 1/2" thick
7-ply maple plywood with waterfall front. |
24
3/4"-
30" |
22
1/2" |
1Y Options
Metal Finish Options: While black powder-coated finish
is standard, we also offer putty, gray and silvervein powder-coated finishes.
SPF: Special paint finishes are available. Please call
for a selection of colors or help in matching an existing
color. Call for lead time and cost.
1Y Performance
Packages
|
Home > 1Y
Stool Series | < Previous
Page
